MCS certified, F-Gas registered heat pump installers covering Canary Wharf and Greater London. Air source heat pump installation, servicing and repairs — free heat loss survey, fixed-price quote in 24 hours.
Our engineers cover Canary Wharf and nearby Wapping, Greenwich, East London, Tower Hamlets, across Greater London, installing, servicing and repairing heat pumps and air conditioning for homes and businesses. Emergency call-outs are available 7 days a week, including evenings and weekends. Every job is handled by F-Gas registered engineers, with MCS certified installers for heat pump work.
F-Gas registered engineers installing and servicing air conditioning and heat pumps across Canary Wharf and the wider Greater London area. From single-room splits and multi-split systems for homes to VRF, cassette and ducted installations for offices, restaurants, hotels and server rooms. Free surveys, fixed-price quotes and 7-day availability across Canary Wharf.
Whether you need air source heat pump installation for a Victorian terrace, a new-build flat or a commercial building in Canary Wharf, our MCS certified and F-Gas registered engineers handle Canary Wharf heat pump installation end-to-end — room-by-room heat loss survey, radiator and cylinder sizing, fixed-price quote, installation, commissioning and warranty registration on the day.
Looking for heat pump installers in Canary Wharf for a boiler replacement? Start with our air source heat pump installation service, compare system types on the full heat pump & HVAC service list, or check typical costs on our heat pump prices page.
Air source heat pump installation in Canary Wharf — replace a gas or oil boiler with a low-carbon, high-efficiency system, fully commissioned.
Air Source Heat Pump Installation in Canary Wharf →
HOMEHeat pump installers in Canary Wharf for houses and flats — heat loss survey, radiator and cylinder sizing, tidy single-visit installs.
Residential Heat Pumps in Canary Wharf →
COMMCommercial heat pump installation across Canary Wharf — offices, retail, schools and hospitality, installed out of hours where needed.
Commercial Heat Pumps in Canary Wharf →
SERVICEAnnual heat pump servicing, breakdown repairs and refrigerant work for all makes across Canary Wharf.
Heat Pump Servicing & Repairs in Canary Wharf →
ACWall, cassette, ducted and multi-split systems in Canary Wharf — heating and cooling from one heat pump system.
Air Conditioning Installation in Canary Wharf →
F-GASMandatory F-Gas leak inspections and TM44 energy assessments for commercial systems in Canary Wharf.
F-Gas Compliance & TM44 in Canary Wharf →
F-Gas registered engineers covering the full range of air conditioning, heat pump and ventilation work across Canary Wharf — supply, install, service, repair and compliance.
Supply and installation of air conditioning systems in Canary Wharf — residential and commercial. F-Gas registered engineers, all major brands, full warranty and commissioning certificate.
Fully-supplied AC packages in Canary Wharf — unit, brackets, pipework, condensate and commissioning included. Fixed-price quotes with no hidden extras.
Like-for-like AC replacement in Canary Wharf — remove your old R22 or end-of-life unit and install a modern R32 system with better efficiency and lower running costs.
Move an existing AC unit to a new wall, room or building in Canary Wharf — refrigerant recovery, re-piping, re-mount and re-commissioning by F-Gas engineers.
Domestic air conditioning for houses and flats in Canary Wharf — quiet, efficient wall-mounted splits sized for bedrooms, lounges and home offices.
Quiet, sleep-friendly bedroom AC in Canary Wharf — low-noise units with night mode, tidy pipework and neutral finishes to blend into any decor.
Cool multiple rooms in Canary Wharf from a single outdoor unit — 2, 3, 4 or 5-port multi-split systems with individual room control.
Short-term portable AC hire in Canary Wharf for offices, events and emergency cooling — delivery, install and collection included.
Design, supply and installation of commercial air conditioning in Canary Wharf — offices, retail, hospitality and industrial. Full turnkey delivery from survey to commissioning.
Office AC systems in Canary Wharf — cassettes, ducted or wall-mounted units zoned to your floor plate. Weekend fits available so trading isn't interrupted.
Retail air conditioning in Canary Wharf — discreet cassettes and ducted systems that cool the shop floor without disrupting the customer experience.
Restaurant and café AC in Canary Wharf — comfort cooling for the dining area balanced with the kitchen extract system to keep pressure and airflow right.
Hotel and hospitality AC in Canary Wharf — per-room control with central BMS oversight. Phased install plans so rooms stay bookable.
Large-volume cooling and cooling+heating for warehouses and light industrial units in Canary Wharf — high-wall, ducted and destratification solutions.
School, college and nursery AC in Canary Wharf — low-noise cooling for classrooms, IT suites and admin blocks, installed inside term breaks.
Precision cooling and comfort cooling for server rooms and comms cabinets in Canary Wharf — N+1 resilience, low-temp operation and 24/7 monitoring.
Wall, floor, ceiling and cassette split systems for homes and small commercial units in Canary Wharf — the most efficient way to cool a single room.
Four-way ceiling cassette AC in Canary Wharf — flush-fit units that deliver even airflow across offices, shops and reception areas.
Fully concealed ducted AC in Canary Wharf — hidden in the ceiling void with slim grilles, giving a clean architectural finish for premium homes and offices.
Variable Refrigerant Flow / Volume systems in Canary Wharf — connect dozens of indoor units to one outdoor plant, with simultaneous heating and cooling.
Air source heat pump installation in Canary Wharf — replace your gas or oil boiler with a low-carbon, high-efficiency heating system.
Ground source heat pump design and install in Canary Wharf — horizontal loops or borehole arrays for the highest year-round efficiency.
Hybrid heat pump systems in Canary Wharf — pair an air source heat pump with your existing boiler for the smartest running costs across the year.
Annual heat pump service in Canary Wharf — refrigerant checks, coil clean, flow rate verification and warranty-required inspection report.
Fault-finding and repair for all makes of air and ground source heat pumps in Canary Wharf — refrigerant, controls, hydraulics and electrical.
Planned AC servicing in Canary Wharf — filter clean, coil wash, refrigerant check and performance test. Keeps warranties valid and running costs low.
Fault diagnosis and repair for wall, cassette, ducted and VRF units in Canary Wharf — refrigerant leaks, PCB faults, sensors, fans and controls.
24/7 emergency AC breakdown response in Canary Wharf — priority attendance for server rooms, restaurants and any business where cooling is business-critical.
Planned Preventative Maintenance (PPM) contracts in Canary Wharf — one or two visits a year, priority breakdown response and discounted parts.
Full antibacterial deep clean of AC indoor units in Canary Wharf — removes mould, bacteria and odours from evaporator coils and drain trays.
Refrigerant recharge for AC units and heat pumps in Canary Wharf — leak trace first, then recover, evacuate and recharge to manufacturer spec.
F-Gas leak inspection and compliance certification in Canary Wharf — mandatory for any commercial system containing 5 tonnes CO₂e or more of refrigerant.
Legally-required TM44 inspection in Canary Wharf for AC systems over 12kW — energy assessment report lodged on the government register.
Electronic and dye-based refrigerant leak detection in Canary Wharf — find and fix leaks fast to protect performance and stay legal under F-Gas rules.
Mechanical Ventilation with Heat Recovery in Canary Wharf — recover up to 92% of the heat you'd otherwise vent, ideal for new builds and deep retrofits.
Supply and extract ventilation for offices, kitchens and industrial units in Canary Wharf — designed to Building Regulations Part F.
Free no-obligation AC design survey in Canary Wharf — heat-load calculation, unit sizing, install route and fixed-price quote issued within 48 hours.
Smart thermostat and zoning controls for AC and heat pumps in Canary Wharf — cut running costs and control your climate from your phone.
Phase out illegal R22 refrigerant systems in Canary Wharf — recover the old gas legally and replace with a modern R32 unit up to 40% more efficient.
Air- and water-cooled chiller install, service and repair in Canary Wharf — process cooling, comfort cooling and data centre applications.
Cold rooms, walk-in freezers and cellar cooling in Canary Wharf — refrigeration design, install and service for hospitality and food retail.
Daikin D1+ accredited installer in Canary Wharf — full range from Emura and Stylish domestic units up to VRV IV commercial systems, with 7-year warranty.
Mitsubishi Electric approved installer in Canary Wharf — MSZ and City Multi ranges, hyper-heating and multi-split configurations.
Wet (hydronic) underfloor heating installation in Canary Wharf — new builds, extensions and retrofits, designed as low-temperature systems that pair perfectly with air source and ground source heat pumps.
Underfloor heating repair and fault finding in Canary Wharf — cold zones, manifold and actuator faults, leaks, airlocks and control failures diagnosed and fixed, with same-day emergency attendance.
Underfloor heating fault finding in Canary Wharf — cold zones, no-heat calls and intermittent faults diagnosed with thermal imaging, actuator testing and flow-rate checks before any parts are replaced.
UFH manifold repair in Canary Wharf — leaking valves, seized flow meters, faulty actuators and corroded fittings repaired or replaced on all major manifold brands.
Underfloor heating manifold replacement in Canary Wharf — old or failed manifolds swapped for modern stainless steel units with new actuators, flow meters and blending control.
UFH actuator replacement in Canary Wharf — stuck or failed thermal actuators swapped per zone, restoring individual room control without replacing the whole manifold.
UFH flow meter replacement in Canary Wharf — clouded, stuck or broken manifold flow gauges replaced so each loop can be balanced accurately again.
UFH manifold valve replacement in Canary Wharf — leaking isolation, filling and drain valves on the manifold replaced, with system drain-down and refill handled cleanly.
UFH pump replacement in Canary Wharf — failed or noisy underfloor heating circulation pumps swapped for correctly sized energy-efficient models, with blending valve checks included.
UFH blending valve replacement in Canary Wharf — failed mixing valves causing over-hot or stone-cold floors replaced, protecting screed and floor finishes from high flow temperatures.
UFH mixing valve repair in Canary Wharf — sticking thermostatic heads and scaled valve bodies serviced or rebuilt, restoring safe low-temperature flow to your underfloor loops.
UFH wiring centre replacement in Canary Wharf — burnt-out or obsolete control centres swapped, with actuators, thermostats and boiler/heat pump switch live re-landed and labelled.
Heatmiser wiring centre replacement in Canary Wharf — UH1, UH4 and UH8 centres replaced or upgraded to Neo-compatible versions, keeping all your zones and thermostats working.
UFH thermostat replacement in Canary Wharf — failed or outdated room stats swapped for programmable or smart thermostats, with floor probes fitted where needed for timber and LVT floors.
UFH zone not heating in Canary Wharf — single cold room or whole cold wing traced to actuator, thermostat, airlock or blockage and fixed, usually in one visit.
UFH actuator not opening in Canary Wharf — testing confirms whether the head, wiring centre or thermostat is at fault, then the failed part is replaced on the spot where stock allows.
UFH manifold leaking in Canary Wharf — drips from valves, gauges and unions traced, resealed or replaced before they damage the cabinet, floor or ceiling below.
UFH low-flow fault diagnosis in Canary Wharf — sludge, scaled mixing valves, undersized pumps or kinked pipe identified and cleared so loops get design flow again.
UFH airlock removal in Canary Wharf — air trapped in underfloor loops purged loop-by-loop, restoring full circulation without repeated top-ups or noisy pipes.
UFH balancing in Canary Wharf — every loop's flow rate set to the design figure so rooms heat evenly and the heat source runs at its most efficient flow temperature.
UFH flushing in Canary Wharf — power and chemical flushing removes sludge and installation debris from underfloor loops, restoring flow and protecting pumps and valves.
UFH commissioning in Canary Wharf — new or altered underfloor systems filled, vented, balanced and control-tested, with heat-up schedule for new screeds and full handover documentation.
UFH pressure testing in Canary Wharf — underfloor loops pressure tested before screeding or handover, with test certificates for builders, warranty providers and insurers.
UFH leak detection in Canary Wharf — non-invasive trace and thermal imaging locates underfloor pipe leaks to within a tile, minimising floor lifting and repair cost.
UFH controls upgrade in Canary Wharf — old dial stats and single-zone controls replaced with room-by-room smart control, cutting heat-pump and boiler run times.
UFH smart thermostat conversion in Canary Wharf — convert underfloor heating to app-controlled smart stats with schedules, geofencing and energy reporting per room.
Heat pump buffer vessel installation in Canary Wharf — correctly sized buffers added to stop short-cycling, provide defrost volume and protect the compressor.
Heat pump volumiser installation in Canary Wharf — in-series volumisers increase system water content on the flow or return, a simple fix for short-cycling where space is tight.
Heat pump circulation pump replacement in Canary Wharf — failed or undersized primary and secondary pumps swapped for correctly rated models, restoring design flow rates.
Heat pump low-flow fault diagnosis in Canary Wharf — blocked strainers, closed valves, sludge or pump faults found and cleared so the unit stops tripping on flow alarms.
Heat pump flow-temperature problems solved in Canary Wharf — systems that can't reach temperature, or run far hotter than needed, diagnosed and corrected for comfort and COP.
Heat pump system balancing in Canary Wharf — radiators and UFH loops balanced to design flow rates so every room heats evenly at the lowest possible flow temperature.
Heat pump hydraulic separation in Canary Wharf — low-loss headers and plate heat exchangers specified and installed where primary and secondary circuits need independent flow rates.
Heat pump low-loss header installation in Canary Wharf — headers sized and fitted to separate the heat pump circuit from multiple heating zones without flow conflict.
Heat pump plate heat exchanger installation in Canary Wharf — plate HX fitted to separate glycol or dirty circuits from the heat pump, or to interface with existing boiler systems.
Heat pump antifreeze and glycol testing in Canary Wharf — glycol concentration, pH and inhibitor levels tested and corrected so outdoor units are protected to the right frost point.
Heat pump system flushing in Canary Wharf — low-pressure power and chemical flushing removes magnetite and debris that block strainers and plate heat exchangers and kill efficiency.
Heat pump commissioning correction in Canary Wharf — poorly commissioned systems re-set: flow rates, weather compensation, sensor positions and controller settings corrected to design.
Heat pump weather compensation setup in Canary Wharf — heating curves configured so flow temperature tracks outdoor conditions, the single biggest lever on heat pump running costs.
Heat pump heating curve optimisation in Canary Wharf — curves fine-tuned over real conditions so the system runs at the lowest flow temperature that still keeps every room comfortable.
Heat pump emitter assessment in Canary Wharf — radiators and UFH output measured room-by-room to confirm they can deliver design heat at low flow temperatures, with upgrade options costed.
Heat pump cylinder integration in Canary Wharf — hot water cylinders connected and commissioned with the heat pump, including legionella cycles, priority control and immersion backup.
Heat pump UFH integration in Canary Wharf — underfloor heating connected directly to the heat pump at low flow temperature, often without a mixing valve, for maximum efficiency.
Hybrid heat pump controls in Canary Wharf — heat pump and boiler configured to work together with smart switch-over on price or temperature, so each heat source runs when it's cheapest.
A typical air source heat pump installation in Canary Wharf ranges from £7,000 to £13,000 depending on property size, radiator upgrades and cylinder requirements. Every Canary Wharf quote is fixed in writing within 24 hours of the heat loss survey.
Most single-room installations in Canary Wharf are completed in one day. Multi-split and small commercial systems typically take 1–2 days. We usually have a survey slot available within the week and an install slot within 2–3 weeks across Greater London.
Yes. Our heat pump installers work to MCS standards across Canary Wharf, designing and installing air source heat pumps to replace gas and oil boilers. Every installation starts with a free room-by-room heat loss survey and includes commissioning, warranty registration and post-install support.
Yes. Every engineer we send to Canary Wharf is F-Gas Category 1 certified for refrigerant handling and holds the manufacturer accreditations for Daikin, Mitsubishi Electric, Panasonic, LG and Samsung.
We offer 24/7 emergency AC breakdown response across Canary Wharf. Where cooling is business-critical (server rooms, restaurants, retail) we prioritise attendance within 4 hours and can loan portable AC units while a permanent repair is arranged.
Yes. A correctly sized air source heat pump can fully replace a gas or oil boiler for both space heating and hot water. Success depends on a good heat-loss survey, correctly sized radiators (or underfloor heating) and reasonable insulation.
Typical air source heat pump installations for a 3-bed home cost £14,000–£18,000 fully installed, including cylinder, controls and commissioning. Final price depends on property size, insulation and radiator design.
Yes. Modern R32 and R290 heat pumps operate down to −20°C with usable output. Correct sizing, low-temperature radiator design and good insulation are the keys to consistent warmth all winter.
Call 07427 826446 or send an enquiry through our contact page. We arrange a survey or visit in Canary Wharf, then send a fixed-price quote within 24 hours. Next-day installation is often available once the quote is accepted.
Yes. Engineers work 7 days a week, including early mornings, evenings and weekends. Emergency air conditioning repair in Canary Wharf is from £180 + VAT and heat pump repair is from £120; the exact cost is confirmed before work starts.
We cover all of Canary Wharf and the surrounding towns listed on this page, for homes and commercial premises, including split, multi-split, ducted, VRF and heat pump systems.
An air conditioning service is £120 + VAT per indoor unit and a heat pump service is £185. Single-room air conditioning installation starts from £1,795 + VAT. Larger or commercial jobs are priced after a free survey with a fixed written quote.
Yes. All refrigerant work is carried out by F-Gas registered engineers, and heat pump installations are completed by MCS certified installers.
We also install and service heat pumps in these nearby areas:
Case Study
How booking works in Canary Wharf: call 07427 826446 or send an enquiry, get a fixed-price quote within 24 hours, then choose your installation or service date.
Get a fixed-price quote today. Our F-Gas registered air conditioning and heat pump engineers cover London and the Home Counties seven days a week, with rapid response for breakdowns.
Installations from £1,795 + VAT • Free survey • F-Gas registered engineers